Environmental Protect Side Draft Paint Booth With 4kw Exhaust Fan
- Spray booth professional manufacture
- Automatic sectional fresh air and exhaust air conduction
- Supplier good environment for the painting worker
- Competitive price
- Popular model in Russia market
Detail Specification WD-3
Folding door, 3 folds, 3000×2600 mm(W×H), without frame cover,
colour : blue.
1 unit, 650×1800mm(W×H), colour: white
Galvanized steel assemble, 300mm high, quadrate steel support,
full grilles made by flat bar and twisted steel, galvanized.
2 ramps, 750×2000mm/pc.
Thickness:50mm, width:1150mm, tongue and groove structure,
0.376mm colour steel with polystyrene (EPS) insulation inside,
Ceiling Lights: 8Units×4Pcs=32Pcs×36W, Side Lights: 8Units×2Pcs
6Pcs×18W, with electronic ballasts, lighting boxes are powered
Intake from side upper, exhaust from back upper galvanized steel
frame; white coated steel covered, filled with heat preservation
Intake and Exhaust system
Inlet: 2×3KW double-intake centrifugal fans, model YDW4.5M1, air
capacity for each fan: 10500m3/h.
Outlet: 1×4KW double-intake centrifugal fan, model YDW4.5L1,
air capacity: 12500m3/h.
RIELLO G20 diesel burner, stainless steel heat exchanger, electric
damper actuates from spraying to baking cycle. Max. heating
productivity: 200000kcal/h, Max temperature: 80°C.
Pre-filter, ceiling filter, fibreglass filter, activated carbon
Spraying, heat spraying, baking, time setting, lighting switch,
indicator, thermostat, power supply switch, emergency stop,
temperature limit controller, exhaust with manual damper, all
are normal start.
Spray Booth Technical Parameters WD-3
Inside Dimension: (mm)
Outside Dimension: (mm)
Width of Entrance: (mm)
Height of Entrance: (mm)
Escape Door Dimension: (mm)
Intake Air Fan Capacity: (m3/h)
Exhaust Air Fan Capacity: (m3/h)
Free Air Speed: (m/s)
Frequency of Air Exchange: (time/h)
Maximum Working Temperature: ()
Max. Heating Productivity: (kcal/h)
Air Filter Efficiency:
Total Power: (KW)
Customer visit the factory
Spray booth comonent part
WINDAN SPRAY BOOTH IN THE EXHIBITION
All electron component are guaranteed for 12 months from the date
of receipt.During warranty damage
are free replacement.Customer bear the expense of freightage.
Something about the spray booth
Who needs a spray booth?
Does the mentioned finish or refinish process energy efficient and
meet the production standards and
levels? Or, is there sign of paint or coating overspray, and any
our indicating that paint and coatings
Is the production time spent on redo because of the dust or dirt
contamination or rough maintenance,
rather than meeting production timelines.
Some decisions must be taken, when initially decided to obtain a
spray booth. Cost of a spray booth
system and ultimately its final configuration is affected by,
requirements such as size and portability
of refinish object, material that spray booth made of, and air flow
type needed to provide sufficient
power. These three factor together determine the necessary
Welcome to contact us for Quotation